Anaerobic Adhesive
Anaerobic Adhesive
The word “anaerobic” means “without air”, which means that these adhesives cure on removal of air (oxygen). The other pre-condition for anaerobic adhesives to cure is that they need to be in contact with a metal. Hence, anaerobic adhesives remain in liquid form until they are isolated from oxygen and come in contact with metals like iron, copper, etc. Anaerobic adhesives fill the gaps between metal components in an assembly (for example, a nut and bolt assembly). It is because of this property that they are used to augment the seal or hold components of a mechanical assembly together – all these applications usually require high shear strength.
Parson Adhesive Inc. is one of the leading manufacturers for a wide range of high-quality anaerobic adhesives for industrial engineering applications. Sonlok® range of anaerobic adhesives is used globally by a wide spectrum of industries spanning from electronics to automotive companies. The anaerobic adhesives include thread locking, thread sealant, retaining compound, and gasketing compound. Some grades are certified to NSF, Military, NSF and WRAS specifications.
Typical Applications:
- Automotive engine
- Oil and Gas
- Marine & Shipbuilding
- Motors assembly
- Motor shaft retention
- Computer and IT devices
- Household electrical appliances
- Mobile phones & tablets
- Hard disk drive
Types of Anaerobic Adhesives
Thread Lockers
| Product | Packaging | Description | Colour | Viscosity | Torque In.Lbs /N.mm Break/Prevail |
Cure Speed | Temperature Range ºF | Specification |
|---|---|---|---|---|---|---|---|---|
| 3221 |
|
Adjustment of set screws, small diameter | Purple | 150/350 | 53/30 6/4 |
Fixture Time-20 min. Full Cure-24 hrs |
-65 to 300 | |
| 3222 |
|
Small Screws under 1/4″. Easy removal | Purple | 1,200/5,000 Thixotropic |
53/30 | Fixture Time-20 min. Full Cure-24 hrs |
-65 to 300 | |
| 3242 |
|
1/4″to 3/4″ bolts, medium strength, removable | Blue | 1,200/6,000 Thixotropic |
115/53 | Fixture Time-10 min. Full Cure-24 hrs |
-65 to 300 | (R-46082B) Type II, Grade N |
| 3243 |
|
Oil resistance 1/4″ to 3/4″ bolts, removable | Blue | 2,250/11,000 Thixotropic | 180/62 | Fixture Time-10 min. Full Cure-24 hrs. |
-65 to 300 | |
| 3246 |
|
High temperature resistance, removable |
Blue | 2,600/4500 | 170/48 | Fixture Time-7 min. Full Cure-24 hrs. |
-65 to 450 | |
| 3262 |
|
Permanent, High strength locking up to 3/4″ bolts |
Red | 1,800/5,000 Thixotropic |
190/275 | Fixture Time-20 min Full Cure-24 hrs. |
-65 to 300 | |
| 3266 |
|
High temperature resistance, high strength | Red | 3,500/8,000 | 270/35 30/9 |
Fixture Time-40 min. Full Cure-24 hrs. |
-65 to 450 | |
| 3270 |
|
High strength, Permanent, up to 1″ diameter | Green | 400/600 | 230/350 | Fixture Time-10 min. Full Cure-24 hrs. |
-65 to 300 | |
| 3271 |
|
High strength, Permanent, up to 1″ diameter |
Red | 400/600 | 230/320 | Fixture Time-10 min. Full Cure-24 hrs. |
-65 to 300 | (R-46082B) Type II, Grade K WRAS Certified |
| 3272 |
|
High temperature, high strength up to 1″ diameter |
Red | 8,500/14,500 | 200/220 | Fixture Time-30 min. Full Cure-24 hrs. |
-65 to 450 | |
| 3275 |
|
High strength for larger bolts | Green | 7,000 | 280/280 32/32 |
Fixture Time-30 min. Full Cure-24 hrs. |
-65 to 300 | |
| 3277 |
|
Up to 1/2″ diameter bolts, high strength |
Red | 7,000 | 275/275 | Fixture Time-30 min. Full Cure-24 hrs. |
-65 to 300 | |
| 3290 |
|
Wicking grade for pre-assembled parts |
Green | 289/237 | Fixture Time-10 min. Full Cure-24 hrs. |
-65 to 300 | (R-46082B) Type III, Grade R |
|
| 3294 |
|
High temperature resistance, wicking grade |
Green | 35 | 289/237 | Fixture Time-10 min. Full Cure-24 hrs. |
-65 to 400 |
Thread Sealants
| Product | Packaging | Description | Colour | Viscosity | Specific Gravity | Temperature Range ºF | Seal to Operating Pressure |
|---|---|---|---|---|---|---|---|
| 3511 |
|
Ideal for coarse threads, medium strength | White | 24,000 / 80,000 Thixotropic |
1.09 | -65 to 300 | Seals operating pressure to 10,000 ps |
| 3540 |
|
Cup and Core Plug Sealant | Blue | 7,000 / 12,000 | 1.08 | -65 to 300 | Seals operating pressure to 10,000 psi |
| 3542 |
|
Cup and Core Plug Sealant | Blue | 7,000 / 12,000 | 1.08 | -65 to 300 | Seals operating pressure to 10,000 psi0 |
| 3545 |
|
No Fillers, Pneumatic hydraulic sealant | Purple | 9,000/20,000 | 1.20 | -65 to 300 | Seals operating pressure to 10,000 psi |
| 3554 |
|
High shear strength, refrigerant sealant | Red | 1,500/3,500 | 1.02 | -65 to 450 | Seals operating pressure to 10,000 psi |
| 3564 |
|
General purpose | White | 49,500/132,000 | 1.17 | -65 to 300 | Seals operating pressure to 10,000 psi |
| 3565 |
|
General purpose with controlled strength | White | 175,000/375,000 | 1.10 | -65 to 450 | Seals operating pressure to 10,000 psi |
| 3567 |
|
Ideal for stainless steel fittings | White | 280,000/575,000 | 1.14 | -65 to 300 | Seals operating pressure to 10,000 psi |
| 3569 |
|
Recommended hydraulic sealant | Brown | 300/500 | 1.05 | -65 to 300 | Seals operating pressure to 10,000 psi |
| 3571 |
|
High solvent and chemical resistance | Brown | 1,000/3,000 | 1.10 | -65 to 450 | Seals operating pressure to 10,000 psi |
| 3572 |
|
Slow cure speed, low strength sealant | White | 17,000/50,000 | 1.25 | -65 to 300 | Seals operating pressure to 10,000 psi |
| 3577 |
|
Ideal for coarse threads, medium strength | Yellow | 24,000/80,000 Thixotropic |
1.09 | -65 to 300 | Seals operating pressure to 10,000 psi |
| 3580 |
|
Low sulfur, low halogen thread sealant | White | 300,000/800,000 | 1.08 | -65 to 400 | Seals operating pressure to 10,000 psi |
| 3592 |
|
Medium strength sealant | White | 200,000/500,000 | 1.21 | -65 to 400 | Seals operating pressure to 10,000 psi |
Gasketing Compounds
| Product | Packaging | Description | Colour | Cure State | Temperature Range ºF | Gap Fill | Viscosity | Cure Speed |
|---|---|---|---|---|---|---|---|---|
| 3504 |
|
Instant, low pressure, gap filling | Orange | Rigid | -65 to 300 | Unprimed – 0.030″ Primed – 0.050″ | 500,000/ 1,200,000 Thixotropic | Unprimed- 4 to 24 hrs Primed- 30 min to 4 hrs. |
| 3510 |
|
High temperature flange sealant,chemical resistance | Red | Rigid | -65 to 400 | Unprimed – 0.010″ Primed – 0.020″ | 188,000/500,000 Thixotropic | Unprimed-4 to 24 hrs Primed-30 min to 4 hrs |
| 3515 |
|
Flexible flange sealant | Purple | Flexible | -65 to 300 | Unprimed – 0.010″ Primed – 0.050″ | 275,000/950,000 Thixotropic | Unprimed-1 to 2 hours Primed-15 min to 2 hrs. |
| 3518 |
|
Flexible-solvent resistance gasket sealant | Red | Flexible | -65 to 300 | Unprimed – 0.010″ Primed – 0.050″ | 800,000/3,750,000 Thixotropic | Unprimed-4 to 24 hrs Primed-30 min to 4 hrs. |
| 3573 |
|
Slow curing flange sealant | Green | SemiRigid | -65 to 300 | Unprimed – 0.010″ Primed – 0.020″ | 19,000/60,000 Thixotropic | Unprimed-6 to 48 hrs Primed-1 to 6 hrs. |
| 3574 |
|
Fast curing, large gaps gasket sealant | Orange | SemiRigid | -65 to 300 | Unprimed – 0.010″ Primed – 0.020″ | 30,000/100,000 Thixotropic | Unprimed-1 to 12 hrs Primed-15 min to 2 hrs. |
Retaining Compounds
| Product | Packaging | Description | Colour | Viscosity | Shear Strength(Psi) (Steel/Steel) | Cure Speed | Temperature Range ºF | Specification |
|---|---|---|---|---|---|---|---|---|
| 3603 |
|
For close fitting parts even with slight contamination | Green | 150/350 | 3,875 | Fixture Time-30 min. Full Cure-24 hrs. |
-65 to 300 | |
| 3609 |
|
For close fitting parts, rotor on shafts,bushes, pulleys, etc. | Green | 100/150 | 3,125 | Fixture Time-10 min. Full Cure-24 hrs. |
-65 to 300 | (R-46082B) Type I |
| 3620 |
|
High shear strength,high temperature resistance | Green | 8,400/20,000 Thixotropic | 3,875 | Fixture Time-30 min. Full Cure-24 hrs. |
-65 to 450 | |
| 3635 |
|
High shear strength,slow cure permits realignment | Green | 1,500/2,500 | 4,125 | Fixture Time-60 min. Full Cure-24 hrs. |
-65 to 300 | (R-46082B) Type III |
| 3638 |
|
Maximum strength for loose fitted parts | Green | 2,000/3,000 | 4,575 | Fixture Time-5 min. Full Cure-24 hrs. |
-65 to 450 | WRAS Certified |
| 3640 |
|
High Temperature resistance, high strength | Green | 450/750 | 3,150 | Fixture Time-60 min Full Cure-24 hrs. |
-65 to 400 | (R-46082B) Type II |
| 3641 |
|
Controlled strength where disassembly required | Yellow | 750/1,500 | 1,800 | Fixture Time-30 min. Full Cure-24 hrs. |
-65 to 450 | |
| 3648 |
|
High shear strength withfast cure speed | Green | 400/600 | 4,000 | Fixture Time-5 min. Full Cure-24 hrs. |
-65 to 300 | |
| 3660 |
|
Repair old machinery parts | Silver | Paste | 3,500 | Fixture Time-10 min. Full Cure-24 hrs. |
-65 to 300 | |
| 3661 |
|
UV &Anaerobic cure,High Strength | Amber | 400/600 | 2,250 | Fixture Time-4 min. Full Cure-24 hrs. |
-65 to 300 | |
| 3675 |
|
Slow cure speed, augments press fit assemblies | Green | 100/150 | 3,100 | Fixture Time-20 min. Full Cure-24 hrs. |
-65 to 300 | (R-46082B) Type I |
| 3680 |
|
High strength, high performance for slip fitted parts | Green | 800/1,500 | 4,125 | Fixture Time-10 min. Full Cure-24hrs. |
-65 to 300 |
High Temperature Resistance Anaerobic Adhesive
| Product | Packaging | Description | Colour | Viscosity | Cure Speed | Torque In.Lbs. N.m. Break/Prevail |
Temperature Range ºF |
|---|---|---|---|---|---|---|---|
| 6422 |
|
Extremely high-temperature resistance, medium strength for 1/2″ to 3/4″ bolts |
Blue | Paste | Fixture-90 min Full-24 hrs | 102 / 12 12 / 2 |
-65 0F to 650 °F |
| 6620 |
|
Extremely high-temperature resistance, high strength up to 3/4″ bolts |
Red | Paste | Fixture-30 min Full-24 hrs | 161 / 10 19 / 2 |
-65 0F to 650 °F |
| 6263 |
|
High strength, versatile thread locker up to 1″ diameter |
Red | 400 / 600 | Fixture-10 min Full-24 hrs | 275 / 290 32 / 33 |
-65 0F to 360 °F |
| 6047 |
|
High lubricity, high clamp load for larger bolts > 7/8″ in diameter |
Black | 2,000 / 12,000 Thixotropic |
Fixture-90 min Full-24 hrs | 204 / 35 24 / 4 |
-65 0F to 300 °F |
| 6770 |
|
High-temperature Thread Sealant | Off- White Paste | Paste | Fixture-2 hrs Full-24 hrs |
654 / 87 75 / 10 |
-65 0F to 530 °F |
Pre-Applied Thread Lockers
| Product | Packaging | Application | Colour | Torque In.Lbs.N.m. Break/Prevail | Temperature Range ºF | Cure Speed,Steel @ 25 °C |
|---|---|---|---|---|---|---|
| 3200 | 44 lb Pail Kit | General Purpose | Yellow | 220/10527/13 | -65 to 300 | Fixture-10 min. Full Cure-24 hrs. |
| 3204 | 44 lb Pail Kit | Plated Substrates | Red | 270/26032/31 | -65 to 300 | Fixture-10 min.Full Cure-24 hrs. |
| 3205 | 44 lb Pail Kit | High Strength on most substrates | Peach | 149/5718/7 | -65 to 300 | Fixture-10 min.Full Cure-24 hrs. |
| 3516 |
|
Thread Sealant one part | Orange | 369/17541/20 | -65 to 300 | Fixture-10 min.Full Cure-24 hrs. |
Pipe Sealants
SONLOK® 3555 PIPE SEALANT FOR FIRE SPRINKLER SYSTEMS
SONLOK® 3555 Pipe Sealant and SONLOK 3290 weld sealant are excellent products of choice of fire protection professionals.
SONLOK 3555 Pipe Sealant uses unique anaerobic technology with Teflon ® to prevent leaks in sprinkler systems. SONLOK 3555 Pipe sealant widely used in fabrication and installation to replace pipe dope and sealing tapes with durable and reliable seal.
SONLOK 3555 sealant provides an instant seal of 1,000 psi and a cured seal that surpasses the burst rating of most of the pipes. Due to its unique Teflon ® filled technology and smooth nature, the assembly will require less effort, and eliminate excess wear and tear on installers and equipment.
- UL listed for sprinkler system
- Replaces Pipe Dope and Tapes
- Lubricates To Ease Assembly
- Easy disassembly with hand tools
- Open container will not dry out
- 100% leak-free seal even when the pipe is not completely seated
- No solvent, no shrinkage, lower cost, less downtime
- High temperature resistance, Cures on metals in the absence of air
SONLOK® 3555 Pipe Sealant with PTFE Fabrication and Field Installation Instructions:
- Apply 3555 onto leading 3-4 threads halfway around the male pipe for sizes up to 1 ½ inch. For larger pipe sizes apply completely around the pipe.
- Fasten fittings together. 3555 will seal even when the pipe cannot be ‘driven home’.
- Visually inspect for a white bead of pipe sealant around the entire pipe. Repeat steps 1 and 2 as necessary.
SONLOK® 3565 PIPE SEALANT
SONLOK® 3565 is an anaerobic pipe sealant with paste-like consistency. The anaerobic sealant cures in the absence of air between close-fitting metal surfaces.
SONLOK® 3565 develops controlled strength to facilitate disassembly.
- Apply 3555 onto leading 3-4 threads halfway around the male pipe for sizes up to 1 ½ inch. For larger pipe sizes apply completely around the pipe.
- Fasten fittings together. 3555 will seal even when the pipe cannot be ‘driven home’.
- Visually inspect for a white bead of pipe sealant around the entire pipe. Repeat steps 1 and 2 as necessary.
SONLOK® 3290 WELD SEALANT
SONLOK® 3290 Weld Sealant is an anaerobic sealant that prevents porosity leaks in the welds of sprinkler system fabrication and repairs porosity leaks in the field.
- Use in fabrication to prevent leaks in the field
- Seals leaks in the field
- Easy to use one component system
SONLOK® 3290 Weld Sealant fills all voids or imperfections and cures to form a permanent plastic seal that prevents potential leaks. A cure is initiated by the absence of air and the presence of metal and begins to occur when the sealant wicks into the imperfections.
COPPER SEAL® IDEAL WAY TO BOND COPPER PIPES
Copper Seal® solderless bonding agent for Copper pipes and fittings is the fastest, easiest way to permanently install or repair rigid copper pipe in office buildings, industrial complexes, shopping malls, residential, hotels, manufacturing facilities, apartment buildings, farms, barns, homes. Designed to be used on all rigid copper pipes, fittings, and connectors that carry water including drinking water.Copper Seal® provides a cold weld between rigid copper pipe and copper fittings and connectors. It is very reliable, permanent and durable as a hot solder weld, and is an innovative solution to the time consuming and dangerous hot soldering method of connecting rigid copper pipe to connectors and fittings.
- Non-toxic and 100% safe to use
- Save 75% in installation & repair time
- Excellent weld strength 1,000 psi official rating
Accelerators / Primers
| Product | Packaging | Application | Colour | Viscosity | On Part Life | Dry Time |
|---|---|---|---|---|---|---|
| 3071 |
|
Anaerobic Adhesives | Amber | 2 | 7 days | 30-70 sec. |
| 3049 |
|
Anaerobic Adhesives | Clear/Green | 2 | 30 days | 30-70 sec. |